[SOLVED] Touchpad and video support

Help with issues concerning notebooks, laptops and netbooks.

[SOLVED] Touchpad and video support

Postby descasa » Wed Jun 11, 2014 6:24 pm

Hello all. Just installed Ghost 3.5 on my Lenovo ThinkPad SL400. Being a TP, it has both a trackpoint and a trackpad. Both work although I'd like to be able to use the right border of the trackpad for scrolling, much like the wheel on a mouse. Instructions on the 'Net refer to a synaptics driver, and I remember being able to load that when I was installed FreeBSD -- which unfortunately was thrashed somehow, and which is why I'm trying GhostBSD now. So far so good but as I mentioned, I'd like to be able to use the synaptics driver. If I recall rightly, I had a line in rc.conf (?) which read
Code: Select all
 synaptics_enable="true"
.

Also, I used the Driver "vesa" technique to load and install GhostBSD. Now, I'd like to use my Intel Graphics chip (not sure which one it is, will check when I boot into <ugh> Windows). xinput -list didn't detect the touchpad:
Code: Select all
xinput -list
⎡ Virtual core pointer                       id=2   [master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer                 id=4   [slave  pointer  (2)]
⎜   ↳ PS/2 Mouse                                 id=7   [slave  pointer  (2)]
⎣ Virtual core keyboard                      id=3   [master keyboard (2)]
    ↳ Virtual core XTEST keyboard                id=5   [slave  keyboard (3)]
    ↳ AT Keyboard                                id=6   [slave  keyboard (3)]


Not sure, but I think it should've been able to detect the Intel Graphics chipset as well but anyway...

I combined the two questions into one because I think the Synaptics and Intel Graphics support were coded in the source. Either that, or there were some .ko files for them. I didn't find any in /boot/modules, which is where I think they should be.

Any suggestions on how to get Intel Graphics and Synaptics touchpad support? Will I have to compile the kernel? No big deal, I've done it before but I'd rather not do it again as it'll deprive me of much of the use of my computer while it's at it.

Thanks in advance, regards
Technologist. Writer and Editor. Shakespearean actor
Google Plus: http://google.com/+DanielEscasa
Twitter: @silverlokk

If we choose being kind over being right, we will be right every time.
descasa
 
Posts: 5
Joined: Wed Jun 11, 2014 6:10 pm

[SOLVED] Touchpad and video support

 

Re: Touchpad and video support

Postby ericbsd » Sun Jun 15, 2014 5:26 pm

I will like that you try GhostBSD 4.0 BETA1 and let me know if its fix. If it is not I will like to help you to help to fix that problem.
ericbsd
Site Admin
 
Posts: 269
Joined: Mon Nov 19, 2012 11:54 pm

Re: Touchpad and video support

Postby descasa » Tue Jun 17, 2014 2:51 am

Hi Eric, thanks for getting back to me. Support for my laptop's Intel graphics chipset does seem to work in 4.0 BETA1 -- I didn't have to go in and modify xorg.conf, it gives me the gdm (?) login screen. I wanted to test the synaptics support but thought it might be too much work for a live system so I tried the install. But first, the results from fdisk:

Code: Select all
******* Working on device /dev/ada0 *******
parameters extracted from in-core disklabel are:
cylinders=310101 heads=16 sectors/track=63 (1008 blks/cyl)

Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=310101 heads=16 sectors/track=63 (1008 blks/cyl)

Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 7 (0x07),(NTFS, OS/2 HPFS, QNX-2 (16 bit) or Advanced UNIX)
    start 63, size 83891367 (40962 Meg), flag 0
   beg: cyl 0/ head 1/ sector 1;
   end: cyl 1023/ head 9/ sector 63
The data for partition 2 is:
sysid 131 (0x83),(Linux native)
    start 83891430, size 20964825 (10236 Meg), flag 0
   beg: cyl 1023/ head 255/ sector 63;
   end: cyl 1023/ head 0/ sector 63
The data for partition 3 is:
sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
    start 104856255, size 4194288 (2047 Meg), flag 0
   beg: cyl 1023/ head 255/ sector 63;
   end: cyl 1023/ head 255/ sector 63
The data for partition 4 is:
<UNUSED>

and pc-install.log:

Code: Select all
kern.geom.debugflags: 16 -> 16
Running gpart modify on /dev/ada0
Running: gpart modify -t freebsd -i 3 /dev/ada0
ada0s3 modified[b]
Running: gpart create -s BSD /dev/ada0s3
gpart: geom 'ada0s3': File exists
EXITERROR: Error 1: gpart create -s BSD /dev/ada0s3[/b]
Unmounting: /mnt
Running: umount -f /mnt
umount: /mnt: not a file system root directory
Unmounting DVD/USB media: /cdmnt-install
Running: umount -f /cdmnt-install
umount: /cdmnt-install: not a file system root directory


So I asked gpart (through install) to delete the old GhostBSD 3.5, then created a new partition. Install said that it deleted the old partition and created a new one, then I got an error message telling me to refer to pc-install.log for details. Refer to lines 6-8.

Hmm, maybe I'll try booting into one of my Linux live CDs and running gparted from there to delete the partition.

More, later
Technologist. Writer and Editor. Shakespearean actor
Google Plus: http://google.com/+DanielEscasa
Twitter: @silverlokk

If we choose being kind over being right, we will be right every time.
descasa
 
Posts: 5
Joined: Wed Jun 11, 2014 6:10 pm

Re: Touchpad and video support

Postby ericbsd » Tue Jun 17, 2014 9:03 am

You might have problems to install it, my thought was to see if GhostBSD 4.0 BETA 1 boot and see on which driver it tries to boot.
ericbsd
Site Admin
 
Posts: 269
Joined: Mon Nov 19, 2012 11:54 pm

Re: Touchpad and video support

Postby descasa » Tue Jun 17, 2014 2:07 pm

Hi Eric. You mean I didn't have to install it? Oh well, no worries, my 3.5 was only a few days old and I didn't have much data there. Anyway, I presume you'll want to look at my Xorg.0.log? Attached, if the Upload attachment option works.

[EDIT] ### extension can I use anyway? All right, embedding it instead:
Code: Select all
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 10.0-RELEASE-p1 i386
Current Operating System: FreeBSD livecd 10.0-RELEASE-p3 FreeBSD 10.0-RELEASE-p3 #0: Mon May 26 21:50:36 ADT 2014     root@ericbsd.ghostbsd.org:/usr/obj/i386.i386/usr/src/sys/GHOSTBSD i386
Build Date: 24 April 2014  01:24:14PM
 
Current version of pixman: 0.32.4
   Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 17 21:39:01 2014
(II) Loader magic: 0x81e63bc
(II) Module ABI versions:
   X.Org ANSI C Emulation: 0.4
   X.Org Video Driver: 6.0
   X.Org XInput driver : 7.0
   X.Org Server Extension : 2.0
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9

(--) PCI:*(0:0:2:0) 8086:2a42:17aa:20e4 Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0x80000000/4194304, 0xd0000000/268435456, I/O @ 0x00005c00/8, BIOS @ 0x????????/65536
(--) PCI: (0:0:2:1) 8086:2a43:17aa:20e4 Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xfdb00000/1048576
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
   Section "Device"
      Identifier   "Builtin Default intel Device 0"
      Driver   "intel"
   EndSection
   Section "Screen"
      Identifier   "Builtin Default intel Screen 0"
      Device   "Builtin Default intel Device 0"
   EndSection
   Section "Device"
      Identifier   "Builtin Default vesa Device 0"
      Driver   "vesa"
   EndSection
   Section "Screen"
      Identifier   "Builtin Default vesa Screen 0"
      Device   "Builtin Default vesa Device 0"
   EndSection
   Section "Device"
      Identifier   "Builtin Default fbdev Device 0"
      Driver   "fbdev"
   EndSection
   Section "Screen"
      Identifier   "Builtin Default fbdev Screen 0"
      Device   "Builtin Default fbdev Device 0"
   EndSection
   Section "ServerLayout"
      Identifier   "Builtin Default Layout"
      Screen   "Builtin Default intel Screen 0"
      Screen   "Builtin Default vesa Screen 0"
      Screen   "Builtin Default fbdev Screen 0"
   EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default intel Screen 0" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
   Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
   Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
   Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/local/lib/X11/fonts/misc/" does not exist.
   Entry deleted from font path.
(WW) The directory "/usr/local/lib/X11/fonts/Type1/" does not exist.
   Entry deleted from font path.
(WW) The directory "/usr/local/lib/X11/fonts/100dpi/" does not exist.
   Entry deleted from font path.
(WW) The directory "/usr/local/lib/X11/fonts/75dpi/" does not exist.
   Entry deleted from font path.
(==) FontPath set to:
   /usr/local/lib/X11/fonts/TTF/,
   /usr/local/lib/X11/fonts/OTF
(==) ModulePath set to "/usr/local/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
   If no devices become available, reconfigure HAL or disable AutoAddDevices.
(II) LoadModule: "extmod"
(II) Loading /usr/local/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
   compiled for 1.7.7, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/local/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
   compiled for 1.7.7, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
   compiled for 1.7.7, module version = 1.0.0
   ABI class: X.Org Server Extension, version 2.0
(==) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/local/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
   compiled for 1.7.7, module version = 1.13.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/local/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
   compiled for 1.7.7, module version = 1.0.0
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/local/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
   compiled for 1.7.7, module version = 1.1.0
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
   compiled for 1.7.7, module version = 2.7.1
   Module class: X.Org Video Driver
   ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
   compiled for 1.7.7, module version = 2.3.3
   Module class: X.Org Video Driver
   ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
   i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
   E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
   965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
   Mobile Intel® GM45 Express Chipset,
   Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 00@00:02:0
(WW) Falling back to old probe method for vesa
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/local/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
   compiled for 1.7.7, module version = 0.1.0
   ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Creating default Display subsection in Screen section
   "Builtin Default intel Screen 0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) Mobile Intel® GM45 Express Chipset
(--) intel(0): Chipset: "Mobile Intel® GM45 Express Chipset"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0x80000000
(==) intel(0): Using EXA for acceleration
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA has no monitor section
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "LEN", prod id 16433
xf86TokenToOptinfo: table is NULL
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): Output HDMI-1 has no monitor section
(II) intel(0): I2C bus "HDMIDDC_B" initialized.
(II) intel(0): HDMI output 1 detected
xf86TokenToOptinfo: table is NULL
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
(II) intel(0): Resizable framebuffer: not available (1 3)
(II) intel(0): EDID vendor "LEN", prod id 16433
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output HDMI-1 disconnected
(II) intel(0): Output TV disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
(II) intel(0): detected 2048 kB GTT.
(II) intel(0): detected 32764 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/local/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
   compiled for 1.7.7, module version = 1.0.0
   ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/local/lib/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
   compiled for 1.7.7, module version = 2.5.0
   ABI class: X.Org Video Driver, version 6.0
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000120 to 0x38000120
(WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000400 to 0x18000400
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000206 to 0x00000236
(WW) intel(0): PIPEASTAT before: status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEASTAT after: status: VSYNC_INT_STATUS OFIELD_INT_STATUS EFIELD_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x200000d0 to 0x000c00d0
(WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
(WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
(WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
(WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
(WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
(WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
(WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
(WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
(WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
(WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
(WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
(WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
(WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
(WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710087
(WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x6b405140
(WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
(WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x8000085e
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
(WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x321b (FBC_FENCE_OFF) changed from 0x3500a100 to 0xb4016700
(II) UnloadModule: "vesa"
(II) Unloading /usr/local/lib/xorg/modules/drivers/vesa_drv.so
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): Kernel reported 1006592 total, 0 used
(II) intel(0): I830CheckAvailableMemory: 4026368 kB available
(WW) intel(0): DRI2 requires UXA
drmOpenDevice: node name is /dev/dri/card0
Failed to change owner or group for file /dev/dri! 2: No such file or directory
Failed to change owner or group for file /dev/dri/card0! 2: No such file or directory
drmOpenDevice: open result is -1, (No such file or directory)
Failed to change owner or group for file /dev/dri/card0! 2: No such file or directory
drmOpenDevice: open result is -1, (No such file or directory)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
Failed to change owner or group for file /dev/dri! 2: No such file or directory
Failed to change owner or group for file /dev/dri/card0! 2: No such file or directory
drmOpenDevice: open result is -1, (No such file or directory)
Failed to change owner or group for file /dev/dri/card0! 2: No such file or directory
drmOpenDevice: open result is -1, (No such file or directory)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] loaded kernel module for "i915" driver.
(II) [drm] DRM interface version 1.2
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0x10000000
(II) intel(0): [drm] ring buffer = 0x30000000
(II) intel(0): [drm] mapped front buffer at 0xd088e000, handle = 0x40000000
(II) intel(0): [drm] mapped back buffer at 0xd2190000, handle = 0x50000000
(II) intel(0): [drm] mapped depth buffer at 0xd27d0000, handle = 0x60000000
(II) intel(0): [drm] mapped classic textures at 0xd2e10000, handle = 0x70000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
(II) EXA(0): Offscreen pixmap area of 19660800 bytes
(II) EXA(0): Driver registered support for the following operations:
(II)         Solid
(II)         Copy
(II)         Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(WW) intel(0): drmDropMaster failed: Unknown error: -1
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x01fff000 (pgoffset 8191)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x0218e000 (pgoffset 8590)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x0218f000 (pgoffset 8591)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x02190000 (pgoffset 8592)
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x027d0000 (pgoffset 10192)
(II) intel(0): xf86BindGARTMemory: bind key 6 at 0x02e10000 (pgoffset 11792)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00083fff: compressed frame buffer (400 kB, 0x000000007e020000 physical
)
(II) intel(0): 0x00084000-0x0008dfff: HW cursors (40 kB)
(II) intel(0): 0x0008e000-0x0088dfff: fake bufmgr (8192 kB)
(II) intel(0): 0x0088e000-0x00ecdfff: front buffer (6400 kB) X tiled
(II) intel(0): 0x00ece000-0x0218dfff: exa offscreen (19200 kB)
(II) intel(0): 0x01fff000:            end of stolen memory
(II) intel(0): 0x0218e000-0x0218efff: power context (4 kB)
(II) intel(0): 0x0218f000-0x0218ffff: HW status (4 kB)
(II) intel(0): 0x02190000-0x027cffff: back buffer (6400 kB) X tiled
(II) intel(0): 0x027d0000-0x02e0ffff: depth buffer (6400 kB) Y tiled
(II) intel(0): 0x02e10000-0x04e0ffff: classic textures (32768 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output HDMI-1 is connected to pipe none
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 260
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: XF86DRI Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Loaded and initialized /usr/local/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 211
(II) config/hal: Adding input device AT Keyboard
(II) LoadModule: "kbd"
(II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
   compiled for 1.7.7, module version = 1.8.0
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 7.0
(**) AT Keyboard: always reports core events
(**) Option "Protocol" "standard"
(**) Option "XkbRules" "base"
(**) Option "XkbModel" "pc105"
(**) Option "XkbLayout" "us"
(II) XINPUT: Adding extended input device "AT Keyboard" (type: KEYBOARD)
(II) config/hal: Adding input device PS/2 Mouse
(II) LoadModule: "mouse"
(II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
   compiled for 1.7.7, module version = 1.9.0
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 7.0
(**) Option "Device" "/dev/psm0"
(==) PS/2 Mouse: Protocol: "Auto"
(**) PS/2 Mouse: always reports core events
(**) Option "Device" "/dev/psm0"
(==) PS/2 Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) PS/2 Mouse: ZAxisMapping: buttons 4 and 5
(**) PS/2 Mouse: Buttons: 5
(II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
(**) PS/2 Mouse: (accel) keeping acceleration scheme 1
(**) PS/2 Mouse: (accel) acceleration profile 0
(II) PS/2 Mouse: SetupAuto: hw.iftype is 3, hw.model is 0
(II) PS/2 Mouse: SetupAuto: protocol is PS/2
(II) PS/2 Mouse: ps2EnableDataReporting: succeeded
(II) intel(0): EDID vendor "LEN", prod id 16433
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.50  1280 1332 1396 1416  800 803 806 818 -hsync -vsync (49.1 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16433
(II) intel(0): xf86BindGARTMemory: bind key 7 at 0x04e10000 (pgoffset 19984)
(II) intel(0): [drm] mapped front buffer at 0xd088e000, handle = 0x80000000
(II) intel(0): xf86UnbindGARTMemory: unbind key 7
(II) intel(0): EDID vendor "LEN", prod id 16433
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.50  1280 1332 1396 1416  800 803 806 818 -hsync -vsync (49.1 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16433
(II) intel(0): xf86BindGARTMemory: bind key 8 at 0x04e10000 (pgoffset 19984)
(II) intel(0): xf86UnbindGARTMemory: unbind key 8
(II) intel(0): EDID vendor "LEN", prod id 16433
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.50  1280 1332 1396 1416  800 803 806 818 -hsync -vsync (49.1 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16433
(II) intel(0): xf86BindGARTMemory: bind key 9 at 0x04e10000 (pgoffset 19984)
(II) intel(0): xf86UnbindGARTMemory: unbind key 9
(II) intel(0): EDID vendor "LEN", prod id 16433
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.50  1280 1332 1396 1416  800 803 806 818 -hsync -vsync (49.1 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16433
(II) intel(0): xf86BindGARTMemory: bind key 10 at 0x04e10000 (pgoffset 19984)
(II) intel(0): xf86UnbindGARTMemory: unbind key 10

Seems to me that X did recognize my Intel chipset, not sure if it's using it though.
Technologist. Writer and Editor. Shakespearean actor
Google Plus: http://google.com/+DanielEscasa
Twitter: @silverlokk

If we choose being kind over being right, we will be right every time.
descasa
 
Posts: 5
Joined: Wed Jun 11, 2014 6:10 pm

Re: Touchpad and video support

Postby descasa » Sun Jul 13, 2014 1:36 pm

For anyone else wanting to tweak his or her touchpad, I got it working, thanks to this thread on the FreeBSD forums. In brief:

in /boot/loader.conf:
Code: Select all
hw.psm.synaptics_support="1"


in /etc/rc.conf:
Code: Select all
#conf for Trackpoint and Trackpad
    moused_enable="YES"
    moused_ums0_flags="-F 200 -A 2.0,1.5 -a 2.0 -r high"


in /etc/sysctl.conf:
Code: Select all
# Synaptics Touchpad
    hw.psm.synaptics.vscroll_hor_area=0
    hw.psm.synaptics.vscroll_ver_area=-600
    hw.psm.synaptics.vscroll_min_delta=50
    hw.psm.synaptics.vscroll_div_min=100
    hw.psm.synaptics.vscroll_div_max=150

    hw.psm.synaptics.min_pressure=20
    hw.psm.synaptics.max_pressure=220
    hw.psm.synaptics.max_width=10

    hw.psm.synaptics.weight_current=3
    hw.psm.synaptics.weight_previous=6
    hw.psm.synaptics.weight_previous_na=20
    hw.psm.synaptics.weight_len_squared=2000

    hw.psm.synaptics.div_min=9
    hw.psm.synaptics.div_max=17
    hw.psm.synaptics.div_max_na=30
    hw.psm.synaptics.div_len=100

    hw.psm.synaptics.multiplicator=10000

    hw.psm.synaptics.margin_top=200
    hw.psm.synaptics.margin_right=200
    hw.psm.synaptics.margin_bottom=200
    hw.psm.synaptics.margin_left=200

    hw.psm.synaptics.na_top=1783
    hw.psm.synaptics.na_right=563
    hw.psm.synaptics.na_bottom=1408
    hw.psm.synaptics.na_left=1600

    hw.psm.synaptics.window_min=4
    hw.psm.synaptics.window_max=10

    hw.psm.synaptics.taphold_timeout=125000


If there's anyone out there for whom this doesn't quite work, gimme a holler, because it means I missed something.

[EDIT] I don't think this is specific to Thinkpads, may work for trackpads for other laptops as well.
Technologist. Writer and Editor. Shakespearean actor
Google Plus: http://google.com/+DanielEscasa
Twitter: @silverlokk

If we choose being kind over being right, we will be right every time.
descasa
 
Posts: 5
Joined: Wed Jun 11, 2014 6:10 pm

Re: Touchpad and video support

Postby ericbsd » Sun Jul 13, 2014 2:28 pm

Thanks for sharing!
ericbsd
Site Admin
 
Posts: 269
Joined: Mon Nov 19, 2012 11:54 pm


Return to Laptops

Who is online

Users browsing this forum: No registered users and 0 guests